Help with wiring Subvoton 72150(M) controller

grga

1 W
Joined
Mar 5, 2013
Messages
60
Location
Croatia
Hi guys,

I really wait for a long time to assemble this bike and would like to do that on my own. It is Chinese, so called enduro e-bike bought on this forum.
Here are some pictures and some questions after. ;)

screenshot-13.png

screenshot-14.png

screenshot-15.png

screenshot-17.png

screenshot-16.png


So, main question is last picture, unfortunately I don't have motor connector pictures but I presume that colors should me matched, right? Small black/white connector is for throttle?

4th pic is for TFT display which I have.

2nd picture are motor phases and battery positive and negative pole. It should be color matched.

I have bluetooth connection for that controller, which app to use to set it up? Do I need to do that before connecting to 20S Li-ion battery which I have ready for that?

If I limit it to 60 Amps max, am I allowed to put it inside battery box, to be hidden or should I limit Amps even lower?

How to find (or make) 12V output for lights and horn? Output for throttle is 5V, is it?


Thank you very much for all your help, in advance.

EDIT: I'll post some motor connectors pictures tomorrow.
 
Finally, I have additional, motor connectors picture.

So...
screenshot-465.jpg




I understand that those thick wires are motor phases and it logical where to connect them. But, what to do with other two (same) connectors? Where to connect them to Subvoton?

and, additional subvoton's "free" connectors
screenshot-466.jpg

screenshot-467.jpg
 
Back
Top