VESC Field Weakening Current Question

Get all your technical information about electric bikes here.
Post Reply
rg12   1 MW

1 MW
Posts: 1558
Joined: Jul 26 2014 4:22pm

VESC Field Weakening Current Question

Post by rg12 » Jan 19 2022 3:42pm

A friend flashed a new firmware on a vesc and now has field weakening which is super cool.
The thing is that compared to ASI for example which rates it's FW in percentage, here it's in amps.
Now I have no idea what is considered high and what's low current for FW.

Can someone please explain why is it rated in current?

larsb   10 MW

10 MW
Posts: 2447
Joined: Dec 10 2014 5:12am
Location: Gothenburg, Sweden

Re: VESC Field Weakening Current Question

Post by larsb » Feb 02 2022 11:35am

I think it's complicated to answer easily, this is my understanding.

the current during field weakening is applied with a different angle to the normal (90 degree angled) direction versus the magnetic field of the rotor. The applied total current can then be broken down into the 90deg part (q-axis direction) and the field weakening part (d-axis direction) and the field weakening part can either be expressed as a percentage of the 90deg direction current or as a current value in amperes.

100A field weakening current when your phase current setting is 200A will then mean 50% field weakening current.

Post Reply