trying to id controller / software

flez1966

100 W
Joined
Dec 22, 2010
Messages
112
Location
UK
hi, bought this controller back in january but now i have the bike off the drive and on the road a fault has shown up, on the drive i can only get to 25mph then i'm out of driveway...
so i drove it in the van to some private not on the highway testing and it tops out at 30mph and the controller shuts down needing a power cycle to reset, rinse and repeat.

heres pcb photos and theres an unused socket area, i bought a plug and socket and made a lead from an old arduino serial adapter. connected to the lurx / lutx, rx light stays full on and tx light abought 50%, reversed connections, the same.

so im at a dead end....

AF1QipPZDLcY-JhrwOhEc8KslWCdsupiZtbBsn3VTdNB


AF1QipOyl4649-T8Ii39n_rznpsRLJQsMwA2FiOIJks0



TMNjrVT8uoxrLD3y6


s-l500.jpg

IMG_20220129_192151.jpg

IMG_20220128_204410.jpg

IMG_20220128_204139.jpg


if the images dont show then this album link should work


https://photos.app.goo.gl/5bk4XXuqKYGeGjUH6
 
Hello, what is the brand of your controller? "Votol" ?
 
Back
Top