yesterday i tried the 36 combination sheet as i had issue with the controller tripping out after 30mph or so. found 'best' combination still same.
decided to do it again to double check my work, got so far through the sheet and boom...
just went short on one phase.
so suggestions for replacement mosfets to run at 3kw@84v, i think the boom was the fact the pack is 84v and the original mosfets are only rated at 85v, and the general opinion on these 'skysilicon' is that they are of poor quality
decided to do it again to double check my work, got so far through the sheet and boom...
just went short on one phase.
so suggestions for replacement mosfets to run at 3kw@84v, i think the boom was the fact the pack is 84v and the original mosfets are only rated at 85v, and the general opinion on these 'skysilicon' is that they are of poor quality