Page 3 of 4

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jul 03 2011 2:18pm
by Arlo1
IM running or should I say blowing up 24 fet controllers and the xpd doesn't currently support them!

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jul 03 2011 2:58pm
by gensem
Arlo1 wrote:IM running or should I say blowing up 24 fet controllers and the xpd doesn't currently support them!
It already has the 24 and 32 fet ones... just the 36 is missing.

Have a look.

https://developer.berlios.de/project/sh ... p_id=12389

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jul 04 2011 8:55am
by Arlo1
WHat is that my comeputer wont let me see it!

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jul 04 2011 11:50am
by gensem
Its because of the invalid certificate;

direct download url below

http://prdownload.berlios.de/xpd/xpd-0.2.0-windows.zip

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Aug 04 2011 3:49pm
by Bubba
I've got a question. I've searched for hours looking for a straight answer with no luck....

Which Switch setting do you use on the Lyen 12FET controller when using a Hall Effect throttle? I see Button and Switch options only.

Also, do the three speed settings have any effect?

Thanks in advance!

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Aug 05 2011 1:00am
by Arlo1
Bubba wrote:I've got a question. I've searched for hours looking for a straight answer with no luck....

Which Switch setting do you use on the Lyen 12FET controller when using a Hall Effect throttle? I see Button and Switch options only.

Also, do the three speed settings have any effect?

Thanks in advance!
Haha the switch setting is to choose wether your three speed switch is a switch or a button. And yes the speed settings work eg. 50% is 50% of everything power and top speed!

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Aug 06 2011 7:29pm
by Bubba
Arlo1 wrote:
Bubba wrote:I've got a question. I've searched for hours looking for a straight answer with no luck....

Which Switch setting do you use on the Lyen 12FET controller when using a Hall Effect throttle? I see Button and Switch options only.

Also, do the three speed settings have any effect?

Thanks in advance!
Haha the switch setting is to choose wether your three speed switch is a switch or a button. And yes the speed settings work eg. 50% is 50% of everything power and top speed!
But I'm not using either a switch nor a button. I'm using a hall effect throttle.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Aug 06 2011 9:02pm
by Arlo1
Bubba wrote:[

But I'm not using either a switch nor a button. I'm using a hall effect throttle.
What I meant is if you use a three speed switch that's what button mode or switch mode is for. Hall effect and Pot type throttles both vary a voltage some ware in between 0-5 v which is what controllers need.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Aug 07 2011 4:24pm
by Bubba
Ahhh! That's kinda what I thought, but just wanted clarification. Thanks!

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Aug 10 2011 7:40pm
by Arlo1
kevo wrote:Three speed switch is nice!
yup i got "cop mode", "friends test ride mode" and "oh shit mode"

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Sep 16 2011 5:38pm
by veloman
This thread has been very helpful, I wish I found it sooner.

Does anyone know why speed setting 120% doesn't increase top speed on my litte mxus geared motor? It's not a power limit, as at 17mph I'm nowhere near the amps it can pull on a hill or accelerating.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Dec 28 2011 12:08am
by DAND214
I don't know if this is a new program or old.

I ask Keywin for the software for the EB3xx controllers I received from him. So he sent this
xpd-0.2.2-windows.zip
(79.63 KiB) Downloaded 490 times
I am still assembling the boards, so I haven't tried this yet.
I'm sure I will be asking questions soon.

Dan

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Feb 14 2012 5:25pm
by Kiwi
there does not appear to be any EB3xx board option in there.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Feb 27 2012 4:02am
by mxer
I have tried to download the Perameter designer setup ALL zip "Mike" installer zip package and i cannot unzip it?, it just say's "Unexspected end of archive" or corrupt ? Anyone else experience this ?

Or is my XPD software conflicting ?

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Feb 27 2012 11:13am
by DAND214
I can't get it to load either.
I can't get the simulator on Ebikes.ca to run.

Running XP pro.

Gone thru all the posts I could and really it doesn't help.

Dan

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Mar 07 2012 2:48pm
by johnrobholmes
Looks like the zip file is corrupt.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Mar 07 2012 3:11pm
by gensem
XPD site is still up...

http://xpd.berlios.de/


Hope this helps.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Apr 02 2012 9:42pm
by toolman2
that setup all file is corrupt? can someone post up a good copy, or is there another way of to do this?
being able to program an ecrazyman controller has been out of reach for me for years now, are we sure it can actually really be done with ant of these files?

i now even have the usb converter made for the new 24 fet, but the software?

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Apr 02 2012 11:40pm
by toolman2
i got things to kinda work, now getting invalid reply byte 'fe'
or invalid reply byte 38
any ideas?

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Apr 13 2012 10:48am
by Degull
Hi everyone. I would like to play with the parameters on my motor controller. I have one of Cellman's EB312-AS-2 controllers and I would like to read and save the settings profile that is currently on the controller before I attempt to tweak them. Is there any way to read the profile that is installed on the controller now before I screw everything up? If I mess everything up I can always go back and install the original parameters. Not sure how I can go about reading the info off the controller. Thanks.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Apr 13 2012 1:32pm
by amberwolf
No way to read from controllers that I am aware of. You're stuck with "blindly" overwriting whatever is there with your new settings.

You might ask Cell_man if he knows what those defaults are, or see if anyone has published them here on ES.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Apr 13 2012 10:02pm
by Degull
Cellman kindly provided the values via email. Thanks for the suggestion. Let see if can make some smoke.

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jun 05 2012 9:30am
by Mowolar
Hi Guys,

I have a new e-bike with attached (picture) controller.

Is the e-bike software and cable compatible with my controller?

Thanks, Lars

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jun 05 2012 10:47am
by ambroseliao
Hi Lars,

It's hard to tell from the label. Can you open the case up and take a photo of the motherboard?

Re: Keywin E-bike Lab Parameter Designer Software Manual-ver

Posted: Jun 05 2012 1:37pm
by Mowolar
Hi ambroseliao,

I didn't know where to focus on, but see attachment for 2 pictures of the mainboard.

Thanks for your help and look forward hearing if it's possible!