disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Get all your technical information about electric bikes here.
WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Nov 18, 2008 4:10 pm

Mathurin wrote:Since the speed sensor is a magnet thing like on a bike computer, then extending the wires and mounting the pickup on the cranks would disable speed limiting.

Also looks like there's a shunt here, adding solder should let it pass more amps:
13.JPG
Hi
Our motor in europe are restricted to 15 mph and in the us they are not
I am getting a controller from a man over there in Canada so i should just be able to swap it and all will be ok and unrestricted is that right,
thanks,
Wraggy. :roll:

WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Nov 19, 2008 2:46 pm

Mathurin wrote:Since the speed sensor is a magnet thing like on a bike computer, then extending the wires and mounting the pickup on the cranks would disable speed limiting.

Also looks like there's a shunt here, adding solder should let it pass more amps:
13.JPG
Hi,
If i can buy a un-restricted one from usa/canada could i just swap it over,
Also could i change it to a chain system instead of the v belt
Wraggy

WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Nov 21, 2008 12:44 pm

Hi,
Please does anybody have any pictures of the hybrid bike they can put on here for me,
thanks,
Andy. :D

WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Nov 23, 2008 3:45 pm

Mathurin wrote:Since the speed sensor is a magnet thing like on a bike computer, then extending the wires and mounting the pickup on the cranks would disable speed limiting.

Also looks like there's a shunt here, adding solder should let it pass more amps:
13.JPG
Hi
I have just got a controller from the us,
the ones we have here are restricted so if i just swap this one all should be ok
On my mercedes hybrid it cuts out at 15 mph and the 300 watt sanyo motor is govened to 220 watts
Please can you tell me if there is anything else i will need to do,
thanks,
Andy.

Mathurin
100 kW
100 kW
Posts: 1178
Joined: May 24, 2006 2:49 pm
Location: Quebec
Contact:

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by Mathurin » Nov 23, 2008 3:57 pm

Post pictures of the new controller please.
You have to know, not fear, that someday you are going to die. Until you know that and embrace that, you are useless. - Tyler Durden, Fight club. Ditch the fake identity you've created for yourself, walk your own way in a society of mindless drones to become real, you are not your social status.

WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Nov 23, 2008 4:20 pm

Mathurin wrote:Post pictures of the new controller please.
Hi,
As soon as it comes i will i have got from rkosiorek off this site he said that he did not know that the bike in the Eu Was restricted
So it is the same as what is on this site if you look at the pics rkosiorek has put on,
please can you tell me what you think

Also do you know where i can get a bigger battery than what is in the bike 24v 5000ma
the size to fit in case is 14" x3" x3

thanks,
Wraggy"

User avatar
rkosiorek
1 MW
1 MW
Posts: 1778
Joined: Jan 18, 2007 2:55 pm
Location: Belleville, Ontario Canada

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by rkosiorek » Nov 23, 2008 8:41 pm

Mathurin wrote:Post pictures of the new controller please.
i'm sending him the controller that is in the pictures. not one like it but that identical one.

rick
DISCLAIMER:
We will not be responsible for damage to equipment, your ego, blown parts, county wide power outages, spontaneously generated mini (or larger) black holes, planetary disruptions, or personal injury that may result from the use of this material.
- Samuel M. Goldwasser -

WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Nov 24, 2008 12:19 pm

rkosiorek wrote:
Mathurin wrote:Post pictures of the new controller please.
i'm sending him the controller that is in the pictures. not one like it but that identical one.

rick
Hi Rick
Looking forward to getting it,
Wraggy :D

WRAGGY
100 µW
100 µW
Posts: 9
Joined: Nov 18, 2008 12:50 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by WRAGGY » Dec 04, 2008 1:01 pm

rkosiorek wrote:
Mathurin wrote:Post pictures of the new controller please.
i'm sending him the controller that is in the pictures. not one like it but that identical one.

rick
Hi Rick,
Not got it yet,
Andy

Snaaps
1 µW
1 µW
Posts: 1
Joined: Oct 26, 2016 3:08 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by Snaaps » Oct 26, 2016 3:14 pm

Hello i have a sachs cmu-1 wheel, but i see a other controller with 2 blue thinks you can adjust.
Is this for tourq en speed?

See pics.
Attachments
20161026_221001-768x1365.jpg
20161026_221011-768x1365.jpg
20161026_221011-768x1365.jpg (249.73 KiB) Viewed 446 times

arturek23
1 µW
1 µW
Posts: 1
Joined: Mar 24, 2017 7:21 am

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by arturek23 » Mar 24, 2017 7:33 am

Hello,
I have a mercedes hybrid e-bike with cmu-3m. The bike is very heavy. Driving on a straight road 20km / h is a torture. Please let me somebody help to take off the speed limit on this bike.

Regards,
Slawek

Axxl
1 µW
1 µW
Posts: 2
Joined: Feb 05, 2018 7:45 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by Axxl » Feb 09, 2018 7:13 am

Hi all,

I'm really impressed by technical details and professional competence of this topic !
I learned a lot, really.

Thank you, rkosiorek !!

I would love to hear from you again too :)
I'm eager to repeat myself your setup with the external controller on 36V.
Could you point me to some type of controller, please ?

It would be my pleasure to report my feedback on this again, and in details.
My motor is the IGH version.

Brgds
A
Last edited by Axxl on Feb 09, 2018 8:44 pm, edited 1 time in total.

mark5
100 kW
100 kW
Posts: 1095
Joined: Dec 28, 2011 9:26 pm
Location: USA

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by mark5 » Feb 09, 2018 7:38 am

Axxl wrote:
Feb 09, 2018 7:13 am
Thank you, rkosiorek !!

I would love to hear from you again too :)
I'm eager to repeat myself your setup with the external controller on 36V.
Could you point me to some type of controller, please ?
Rick Kosiorek passed away in April 2014: https://endless-sphere.com/forums/viewt ... =1&t=58957.

Axxl
1 µW
1 µW
Posts: 2
Joined: Feb 05, 2018 7:45 pm

Re: disecting a Sanyo/Rabbit Tool 250W PAS geared hub motor

Post by Axxl » Feb 09, 2018 7:36 pm

Jesus Christ !
I did not know it....
I'm SORRY, please excuse my ignorance.
...............................................
I read it all.... the condolence page.
I would say a contributor like Rick here, deserved all written there !
R.I.P. Rick !

Post Reply