zeccato wrote: ↑
Mar 17 2020 7:45am
Thanks for your contribution, today I installed xpd, that is the 3 programs (as specified) and it worked well with window 10.
I put the defaut on the 2, 100%, and the 3 position switch on the 2.
my 2018 cable usb already had the bridge,
(EB3 12 FET cellman).
I've made some adjustments, nothing else.
The Pas now works better, it stops almost immediately.
Would you mind telling us the ( current ) version used, and source for the installation, to amend your post?
Trying to pawn through 10+years of iteration, multiple supported, and unsupported Prolific info, different pinout USB > TTL software, flashing procedures, boards, revisions, and other infos... can get a little tedious, to say the least. There is alot of questions in this thread and some very well laid out answers, but having up to date confirmation as to the current hardware and soft wares used is imperative.
Thankyou if you could. or anybody that could, reference. I think I got it, but.. for a program that flashes a controller designed on the other side of the earth well covered ten years ago..... and doesn't read, or sometimes even directly respond to the actual set data b/c of different configuration and hardware, but has a very specific flashing procedure with no confirmation of a successful flash save conjecture.. or experience... now it is like walking a heavy bike uphill. So to say