Hello again
Now I was running my bike in the rain, heavy rain also and my full clothes got wet.
When I was in the middle of my way home I came to a stop, still raining, and this time it stuttered and it started going backwards without any throttle input. A day or two after it start and run, 0,23amps freewheel and do 15-20km/ or 10-15mph without any input won the throttle and sometimes it starts going backwards so I cut battery power start again or as I did, change the phase wires and OH. they worked in previous wrong and after some braking it reseted the throttle and it became normal so phase wires had to go back again.
Please help me to find out if my throttle is non-working or that my controller is or even so if the motorized wheel itself - if a phase have been burnt or playing bungie-jump inside my copper-wire changing the phases?
What´s the best bet?
I will try it out with an extra throttle first and se how it goes, and after that I need to rainproof, controller is under my seat in alot of tape. it should'nt get to hot at 23amps continues(1300W) with only 6-or 9 fets?
thanks