IIIHorseman
100 mW
- Joined
- Feb 24, 2012
- Messages
- 46
I need some assistance with my Ebike setup. When I twist the crystalite throttle (ever so slightly) or WOT, I hear a small studder (from the motor), but the wheel doesn't turn or move. Everything seems to be connected correctly (Cycle Analyst shows 54 Volts). The only thing that I could possible think of is the throttle wires on the crysaltite are red green and yellow. On the Lyen controller port It's red green and black. Green and Red are connected, but since there is not black (only yellow) I put the yellow wire in the black connector.
What are the possible issues?
Here are the Specs:
9 FET 3077 Mark II sensored LYEN edition
48V 10AH LiMN battery
-Crysatlette throttle
-MAC Motor 8T (green, yellow and blue phase wire are connected in the corresponding colors on the Lyen)
What are the possible issues?
Here are the Specs:
9 FET 3077 Mark II sensored LYEN edition
48V 10AH LiMN battery
-Crysatlette throttle
-MAC Motor 8T (green, yellow and blue phase wire are connected in the corresponding colors on the Lyen)