Cromotor v3 Spoke ordering specs!

Get all your technical information about electric bikes here.
Post Reply
thinmint   100 mW

100 mW
Posts: 36
Joined: Sep 20 2012 10:56pm

Cromotor v3 Spoke ordering specs!

Post by thinmint » Jul 19 2014 11:16am

Hey guys
Cant seem to find the information online and Jeremy hasnt gotten back to me yet so I figured I would ask - does anybody know the
-Hub Flange Diameter
-Hub Center to Flange Center
-Hub Spoke Hole Diameter

for the Cromotor V3? Looking to order some spokes and it looks like I need that information to get an accurate spoke length.

Thanks everyone!

thinmint   100 mW

100 mW
Posts: 36
Joined: Sep 20 2012 10:56pm

Re: Cromotor v3 Spoke ordering specs!

Post by thinmint » Jul 20 2014 9:28pm

Anyone??

botz244   10 W

10 W
Posts: 89
Joined: Oct 06 2011 2:13am

Re: Cromotor v3 Spoke ordering specs!

Post by botz244 » Aug 18 2014 2:19am

i found some spec of the motor type in qulbix raptor with cromotor. or copy and paste https://www.google.com/url?sa=t&rct=j&q ... 1344,d.cGU. one and theres pics of it i.my measurement of the diameter was 9 1/8 inch .then convert it to mm. i got a 170mm spoke length on my 26 inch rim. see if that works

gua_rana   10 mW

10 mW
Posts: 34
Joined: Jul 08 2012 6:52am
Location: Northern Europe

Re: Cromotor v3 Spoke ordering specs!

Post by gua_rana » Aug 18 2014 8:45am

Cromotors have 2 sets of spoke holes, ~3,1 mm and ~4,2 mm.
Here's a picture with dimensions for you.
cromotor_v2_flange.JPG
cromotor_v2_flange.JPG (61.06 KiB) Viewed 317 times

Post Reply