Sticky thread index for "E-bike Technical"

[spinningmagnets]

Please be patient as this information storage will be organized over time. Any moderator may feel free to unlock and expand/re-arrange/improve as you see fit...

"(Yet Another) DIY Pre-charge/Kill-switch/Power Isolator" serious_sam, one page
viewtopic.php?f=2&t=105110

"Making a DIY fender with fiberglass", Mattycii
viewtopic.php?f=2&t=49927#p805265

"Definitive Tests on the Heating and Cooling of Hub Motors" (justin_le, 23 pages [includes links to many oil-cooling/ventilating-sideplates threads])
http://endless-sphere.com/forums/viewto ... =2&t=48753

"Oil cooling your hub- NOT snake oil!" (spicerack, 23 pages)
http://endless-sphere.com/forums/viewto ... =2&t=37972

"Temp sensor that's too cool not to share" (Auraslip, 4 pages)
http://endless-sphere.com/forums/viewto ... =1&t=25502

"Torque Arm Picture Thread" (auraslip, 6 pages)
http://endless-sphere.com/forums/viewto ... =2&t=26444

"Using 16/17/18/19-inch moped rims on large DD hubmotors" (spinningmagnets, one page [plus many links to other threads])
http://endless-sphere.com/forums/viewto ... 6#p1048226

"Cycle Analyst V3 - Unofficial User Guide / User Manual" (Teklektik, link from the middle of 111-page CA thread)
http://endless-sphere.com/forums/viewto ... 25#p571345

"DIY custom frames, home carbon-fiber method simplified" (spinningmagnets, 3 pages)
http://endless-sphere.com/forums/viewto ... =2&t=10906

"Dropout Failure Experiments, and a call for Fork Donations" (justin_le, 8 pages)
http://endless-sphere.com/forums/viewto ... =2&t=14195

"Lebowski's motor controller IC, schematic and setup manual" (Lebowski, 48 pages)
http://endless-sphere.com/forums/viewto ... 30&t=36602

"The wheel-building spoke-lacing thread, post your tips" (spinningmagnets, 5 pages)
http://endless-sphere.com/forums/viewto ... =2&t=64324

"Using Reed Switches For E-Brakes" (rkosiorek RIP, one page with more links)
http://endless-sphere.com/forums/viewto ... 16&t=11760

"Science, Physics, Math, & Myth" (Kingfish, 8 pages)
http://www.endless-sphere.com/forums/vi ... =2&t=64907

"The ol Wineboy horn button regen trick" (dogman 2 pages)
viewtopic.php?f=3&t=59411

"Analysis of regen on an ebike" (Justin LE, Grin Tech)
viewtopic.php?f=2&t=7891

"Plug Braking"
viewtopic.php?f=2&t=3342

"Linear Regen Braking for On/Off Regen Controllers" (Amberwolf, one page)
viewtopic.php?f=2&t=17584

"Anderson connector technical information thread" (Amberwolf, one page)
viewtopic.php?f=2&t=17969

"2019 16" moped/scooter tire pop-off: which is the most puncture proof?" (Neptronix, one page)
viewtopic.php?f=2&t=97992

"Adding a resistor/potentiometer inline with throttle to limit power and top-speed"
viewtopic.php?f=2&t=99894

[spinningmagnets]

Technical threads concerning RC motors and controllers (ESC's)

"Timing Adjustment Tool" (Burtie, 18 pages)
http://endless-sphere.com/forums/viewto ... =2&t=19054

"Adding hall sensors to outrunners" (Burtie, 16 pages)
http://www.endless-sphere.com/forums/vi ... 30&t=15686

"mounting hall sensors to R/C brushless motors" (georgeycc, 11 pages)
http://www.endless-sphere.com/forums/vi ... =30&t=9061

RC-ESC vs E-bike controllers" (Jeremy Harris, one page)
http://endless-sphere.com/forums/viewto ... =2&t=23882

"Optical sensors for commutation -Working" (Burtie, 4 pages)
http://endless-sphere.com/forums/viewto ... =2&t=28966

"Adding burtie internal optical sensors to Astro 3210" (http://www.recumbents.com, one page)
http://endless-sphere.com/forums/viewto ... 28&t=39035

[spinningmagnets]

2WD E-bike info:

"Simplified 2WD Wiring with 1WD/2WD Control" (teklektik, one post)
http://endless-sphere.com/forums/viewto ... 4#p1072534

"Wiring Diagram for 2WD and a Single CA V3 with remote Shunt" (teslanv, one page)
http://endless-sphere.com/forums/viewto ... =2&t=71073

"Throttle Tamers for sale" (zombiess: one throttle in, two controller cables out)
http://endless-sphere.com/forums/viewto ... 31&t=51460