vipster76
1 mW
i have just installed a S12S controller my brother gave me
i have shorted out the 4 wires on the lcd cable as per instructions on the wiring diagram but put the power switch 1/2 red/blue (ignition lock)
does this controller need the other sensors connected before it will turn on?
thanks for your help in advance
i have shorted out the 4 wires on the lcd cable as per instructions on the wiring diagram but put the power switch 1/2 red/blue (ignition lock)
does this controller need the other sensors connected before it will turn on?
thanks for your help in advance