lionelt
10 mW
hi,
i test some settings to optimize (more torque for enduro mode)
frame = vector
battery is 18S LIPO 40AH (6x 6S 20AH in 3S2P wiring)
motor is MXUS V3 4T on 26" wheel with tyre 26x2.75
Lyen 18FET 4110 with 10AWG bat and phases wires
here my settings (only test wheel on fly on my bedroom because no front wheel actually (not laced) :
for some of guys here which have same configuration : what are you thinking about these ?
can you tell me if it's ok or can i raise up battery and phase amps ?
One question about auto/cruise, is it possible to disable it (no auto cruise even after 15s, (do "0" seconds = disabled ?)
some pictures...
Thx
i test some settings to optimize (more torque for enduro mode)
frame = vector
battery is 18S LIPO 40AH (6x 6S 20AH in 3S2P wiring)
motor is MXUS V3 4T on 26" wheel with tyre 26x2.75
Lyen 18FET 4110 with 10AWG bat and phases wires
here my settings (only test wheel on fly on my bedroom because no front wheel actually (not laced) :
for some of guys here which have same configuration : what are you thinking about these ?
can you tell me if it's ok or can i raise up battery and phase amps ?
One question about auto/cruise, is it possible to disable it (no auto cruise even after 15s, (do "0" seconds = disabled ?)
some pictures...
Thx
