Chalo wrote: ↑
Dec 03, 2017 5:42 pm
Offset Spoke Bed. The distance from the rim centerline where spokes attach.
Ah. Okay. Visually, it looks like the holes might be alternately offset very slightly, but if they are its a tiny amount. So little I'm not actually sure that they are.
I've also found it impossible to measure. There is simply no convenient surface or edge on this rim to provide an accurate reference datum
That said, I tried feeding in a 1mm offset to a couple of the calculators and it made less than 0.1mm difference to the length; and as I'm rounding to the nearest, higher mm, I guess I can ignore it.