Crystalyte crown tc3080 thermosistor wiring help needed

Get all your technical information about electric bikes here.
Post Reply
tommy1212
10 mW
10 mW
Posts: 26
Joined: Jul 03, 2017 3:47 pm
Location: NY

Crystalyte crown tc3080 thermosistor wiring help needed

Post by tommy1212 » Jan 10, 2018 9:38 pm

Trying to get a correct reading on a ca v3 from my tc3080 thermosistor. It appears to share red and black/ power and ground with the halls. I've tried every combo even disconnected the positive 5v then ground too but no correct reading. It is supposedly a 10k ntc thermosistor. I purchased from em3ev. Motor runs great with halls on a power velocity 18f controller. Can't get a correct temp reading on the controller either. Looking for some help before I give up and purchase a new thermosistor...
20180109_193925_resized.jpg
20180109_193925_resized.jpg (224.41 KiB) Viewed 67 times

User avatar
teklektik
1.21 GW
1.21 GW
Posts: 3568
Joined: Mar 26, 2011 1:15 pm
Location: CT, USA

Re: Crystalyte crown tc3080 thermosistor wiring help needed

Post by teklektik » Jan 10, 2018 10:00 pm

See answer to your duplicate post in another thread....
https://endless-sphere.com/forums/viewt ... 3#p1350072
Visit Grin Technologies at www.ebikes.ca
Build Thread: 2WD Yuba Mundo V4

Post Reply