CrawlingWhisper
10 mW
Hello,
I'm attempting my first E-Bike build and just finished the wiring. Unfortunately not everything works right away. I hooked up all the connectors to my Infineon Controller, the switch to power the system up works, as I can tell by the CA also working. When I turn the throttle the motor does not respond. I use these components:
https://em3ev.com/shop/9-fet-irfb3077-infineon-controller/
https://em3ev.com/shop/half-twist-throttle-3-speed-cruise/
Mac 10T (cassette)
I have a multimeter and this tool:
https://em3ev.com/shop/ebike-tester/
How should I proceed, to make everything work ?
Thanks
Felix
I'm attempting my first E-Bike build and just finished the wiring. Unfortunately not everything works right away. I hooked up all the connectors to my Infineon Controller, the switch to power the system up works, as I can tell by the CA also working. When I turn the throttle the motor does not respond. I use these components:
https://em3ev.com/shop/9-fet-irfb3077-infineon-controller/
https://em3ev.com/shop/half-twist-throttle-3-speed-cruise/
Mac 10T (cassette)
I have a multimeter and this tool:
https://em3ev.com/shop/ebike-tester/
How should I proceed, to make everything work ?
Thanks
Felix