BBSHD C 965 Display Goes blank after a few minutes

Rob33

1 µW
Joined
Feb 19, 2018
Messages
1
Howdy folks,
I Recently,finally put together my first E-bike,with a BBSHD. It has an 3 button C 965 Display.

After it has been powered or for a short time,it just goes blank-it has a battery symbol on the screen,but no PAS. And it is not adjustable in any way. There is no readings for anything. I have to power down,then back on,just to adjust PAS. Then it goes off after a minute.


I found someone describing this problem one place on another forum, but nothing here.

I have went through the C 965 manual and made all of the adjustment recommended there. Still nothing.

Thanks in advance. And thanks all the people who contribute to this site. I have been learning a lot.

Robert24inch Fatbike with BBSHD.jpg
 
Maybe it is entering powersave mode, if it isn't reading a wheelspeed or crank sensor movement in some time? (not sure if the BBSxx systems have a timeout like that, but some other systems do)
 
Back
Top