Problem (solved): wheel doesn't rotate (Kelly / Mxus)

My problem is that wheel doesn't rotate at all. When I give some throttle the wheel moves like 1 inch and that's all. I hear a knock sound from the motor when I give a throttle but wheel doesn't rotate.

Setup is new and I'm trying it a first time. I have double check the wiring and I have not found any problem on that. Controller is Kelly KLS7230S and motor is Mxus 3000W V3. Controller have default settings and they can be found here: https://imgur.com/a/y5pJ7

Sounds like the hall sensor / motor phase wirings would be wrong but I have checked them and they should be ok. Battery setup is 12S / 44V so should ok too.

Does anyone have any good idea what to do next?

. .

amberwolf said:

checked them how?

Click to expand...

Motor and controller cables are connected together so that same colors have connected together. This should be the right connection?

VelluK said:

amberwolf said:

checked them how?

Click to expand...

Motor and controller cables are connected together so that same colors have connected together. This should be the right connection?

Click to expand...

Not necessarily. Lyen controllers are famous for having a different coloring scheme.

Problem solved!
* * * * *

Phase and sensor wire colors didn't match and I had to try all kind of combinations. At last I got the wheel to rotating to the right direction.

These instructions help me:
https://endless-sphere.com/forums/viewtopic.php?t=3484