Benjamin Wassink
1 mW
- Joined
- Apr 21, 2018
- Messages
- 11
Hi there.
In need some help to identify my (MXUS) motor.
I like to know how it looks on the inside and how to open it. It makes a little to much noise in the highest pas mode (5). I ordered some mobilgrease 28 for it.
The C1 setting in my KT-LCD1 is 88. It came this way from the seller and the manual says 87 so what is the right one!?
I still not understand the working of the C3 setting in torque mode. I did try it but no very big notabel differents.
I glued 4 of the 5 magnets in the chainring mountingholes. I notice the start and stop is a little slow. Is there a way to get pas kicks in sooner?
I can try to glue 8 magnets on the chainring but i think they interfer with the sensor as they pretty close to another.
Thanks!
2018-04-21_10-23-36 by Benjamin Wassink, on Flickr
20180421_225408 by Benjamin Wassink, on Flickr
20180421_225454 by Benjamin Wassink, on Flickr
In need some help to identify my (MXUS) motor.
I like to know how it looks on the inside and how to open it. It makes a little to much noise in the highest pas mode (5). I ordered some mobilgrease 28 for it.
The C1 setting in my KT-LCD1 is 88. It came this way from the seller and the manual says 87 so what is the right one!?
I still not understand the working of the C3 setting in torque mode. I did try it but no very big notabel differents.
I glued 4 of the 5 magnets in the chainring mountingholes. I notice the start and stop is a little slow. Is there a way to get pas kicks in sooner?
I can try to glue 8 magnets on the chainring but i think they interfer with the sensor as they pretty close to another.
Thanks!
2018-04-21_10-23-36 by Benjamin Wassink, on Flickr
20180421_225408 by Benjamin Wassink, on Flickr
20180421_225454 by Benjamin Wassink, on Flickr