Fancy pie doesn't work properly

Hi everyone,
i have problem with this motor from dongdianebikekits.com. First problem is that motor dont want connect to the bluetooth aplication-aplication on android still crashing...and second problem-if i am on bike and softly push trottle softly- everything is fine but if i push trottle at one for full power - motor starting make weird noise.

I am waiting for your advice thank you in advance.

Hey! happened to me too just yesterday. Sorry to break it to ya but it's been discontinued.
App also crashes every-time, tested on 5 diff. ver. of Android.

I paid 420€ with tax for mine from a guy called eyebysicles or whatever LOL

I'm planning on removing the internal controller and running it with an external one.

What can I say? though luck for us both.

Hi,
and what do you think about this LCD SW900 ?Can i setup with this LCD?

jaffa said:

Hi,
and what do you think about this LCD SW900 ?Can i setup with this LCD?

Click to expand...

Most certainly. But only witch matched controllers. I always make sure to buy the whole controller LCD pair from ebay or aliexpress.

like this one: https://www.aliexpress.com/item/Free-Shipping-48V1000W-1500W-Controller-LCD3-display-PAS-Set-for-E-bike-and-E-bike-Conversion/32807043297.html?spm=2114.search0104.3.44.74b761d3vxmgJF&ws_ab_test=searchweb0_0,searchweb201602_3_10152_10151_10065_10344_10068_10547_10342_10343_10340_10548_10341_10698_10696_10084_10083_10618_10304_10307_10302_10059_308_100031_10103_10624_10623_10622_10621_10620,searchweb201603_25,ppcSwitch_5&algo_expid=f6810788-2db4-40b8-bdbc-e054dc2e3841-6&algo_pvid=f6810788-2db4-40b8-bdbc-e054dc2e3841&transAbTest=ae803_2&priceBeautifyAB=0

Seller LCD SW 900 tell me It won't work with fancy-pie kits. But here sell this motor with this lcd..Any idea how i setup this motor?

It's not that hard. Not sure if it's the same, but I have the documentation of a similar LCD right here.

Hi eee291,
What do you think connect fancy pie with VESC?

I didn't mean that you can just connect the lcd to the fancy pie. No, what I meant and what I'm going to do soon is buy a Brushless controller that has bluetooth like the original kit.

this one: https://bmsbattery.com/controller/849-s09p-bl-36v48v-450w-controller-for-with-bluetooth-ios-app.html#/43-voltage-48v

What I need to do then is to open the motor remove the old controller. Connect some 1,5mm² or 2,5mm² wires to the three phases and 5 thin wires to the sensors. I will then lead the cables out of the motor through the axle of the motor to where the controller is.

It will have a few trade-offs, like not being able to draw 30 Amps just 22. Also it's a square wave controller.

But if you want the quiet sine wave controller you will need to give up Bluetooth, and go with LCD.