White_Ferret
10 mW
- Joined
- Oct 7, 2016
- Messages
- 23
Hello,
I have Bafang bpm2 48v 500w hub motor and bmsbattery sine wave S12S controller and when I pull the throttle there is a delay until the motor start working.
On the LCD it shows that I pulled the throttle but still there is about 0.5 sec until it starts.
How can I fix it ? Do you recomend to chnage the controller software ? Like this one: https://opensourceebikefirmware.bitbucket.io/windows_instructions/index3.html
or
https://opensourceebikefirmware.bitbucket.io/INSTALL_FIRMWARE.html
thank you
I have Bafang bpm2 48v 500w hub motor and bmsbattery sine wave S12S controller and when I pull the throttle there is a delay until the motor start working.
On the LCD it shows that I pulled the throttle but still there is about 0.5 sec until it starts.
How can I fix it ? Do you recomend to chnage the controller software ? Like this one: https://opensourceebikefirmware.bitbucket.io/windows_instructions/index3.html
or
https://opensourceebikefirmware.bitbucket.io/INSTALL_FIRMWARE.html
thank you