VelluK
1 W
I have a motor braking problem on my bike. When I have some throttle on my bike and I set the throttle to zero and again give some throttle when the bike is just freewheeling the motor makes really strong braking and after that start to accelerate again. The braking is really strong and motor gives really bad sound when braking. There should be some settings on the controller which would fix the problem but I have not found it yet.
Motor is MXUS V3 3K Turbo (7,2kV) and controller is Kelly KLS7230S.
Does anyone have any ideas which settings I should change to fix the problem?
Thanks!
Motor is MXUS V3 3K Turbo (7,2kV) and controller is Kelly KLS7230S.
Does anyone have any ideas which settings I should change to fix the problem?
Thanks!