VESC to hub motor

Hi,
it is possible e board VESC connect to the hub motor like 1000W 48V/30A.And how?I finding little controller for my motor and this looks like a way. What do you think about that
https://www.aliexpress.com/item/Maytech-Benjamin-Vedder-Electronic-Speed-controller-VESC-for-electric-longboard-DIY-skateboard/32712595711.html?spm=2114.search0104.3.1.180853bdVoUFFE&ws_ab_test=searchweb0_0,searchweb201602_3_5722916_10152_10151_10065_10344_10068_5722816_10342_10343_10340_10341_10696_5722616_10084_10083_10618_10307_10303_5722716_5711216_10059_308_100031_10103_10624_5722516_10623_10622_10621_10620_5711316_10814_10815,searchweb201603_25,ppcSwitch_4&algo_expid=086accba-095a-4802-860d-d5d1ed2cb229-0&algo_pvid=086accba-095a-4802-860d-d5d1ed2cb229&transAbTest=ae803_2&priceBeautifyAB=0

It is possible, I do that on my bike right now.

I don't know what kind of connections your hub motor has. You may need to solder different connectors on.

If your hub motor has hall sensors, you can connect those to the VESC. You can also connect an analog throttle and brake signal to the VESC.

sounds good can you add here some info and fotos of your project?

I will post a build thread with more info and pictures in the near future.