eCue
10 kW
The components are a 350w mxus powered via a KT 22A z version controller with lcd5 display on 48v limited to 15A via the controller for the batteries max rating.
The problem
Lately have been having motor shut offs after riding at slower speeds on grade strange thing is its never happened on the same routes until recently now its been happening about once a ride.
Behavior
Once the motor kicks out it will reengage when a fresh application of throttle is used then it cuts out moments later until it just stops restarting.
After the bike sits for 15 minutes it restarts and drives as normal.
Error code 03 shows on the display after the motor shuts down then it disappears , the manual writes error code 03 is a Hall sensor abnormality.
Likely the hall sensor is overheating when under the slower speed load
Good thing is motor is running smooth and seems to be syncing up fine so nothing blown (yet) although maybe its on its way out. ..
Has anyone been threw this scenario to know if I have likely damaged the motor ?
max watts threw was 750w on the 350w motor
```````
``
The problem
Lately have been having motor shut offs after riding at slower speeds on grade strange thing is its never happened on the same routes until recently now its been happening about once a ride.
Behavior
Once the motor kicks out it will reengage when a fresh application of throttle is used then it cuts out moments later until it just stops restarting.
After the bike sits for 15 minutes it restarts and drives as normal.
Error code 03 shows on the display after the motor shuts down then it disappears , the manual writes error code 03 is a Hall sensor abnormality.
Likely the hall sensor is overheating when under the slower speed load
Good thing is motor is running smooth and seems to be syncing up fine so nothing blown (yet) although maybe its on its way out. ..
Has anyone been threw this scenario to know if I have likely damaged the motor ?
max watts threw was 750w on the 350w motor
```````
``