Hi,
We're in the process of assembling around 195 18650 cells in order to power our ME0909 PMDC motor at 48V. It's rated for 100A continious and 300A for 30 seconds.
Our cells will be joined together by massive bus bars and there will be two main bus bars - each being able to carry 150A, giving us a total of that 300A. I'm using 2/0 AWG wire. My question is -
Q1 :What sort of connector/lug/adaptor to I need to put onto the bus bar in order to join the wire to it?
Q2: How exactly do I join it - do I just use a ton of solder?
Q3: Since there are two bus bars - each carrying 150A each - that means two wires. Eventually, those two will have to combine together. Do you know of any "Y splitter"'s for 2/0 gauge wires that I can get? What's the common way of joining together two wires?
All 2/0 AWG.
We're in the process of assembling around 195 18650 cells in order to power our ME0909 PMDC motor at 48V. It's rated for 100A continious and 300A for 30 seconds.
Our cells will be joined together by massive bus bars and there will be two main bus bars - each being able to carry 150A, giving us a total of that 300A. I'm using 2/0 AWG wire. My question is -
Q1 :What sort of connector/lug/adaptor to I need to put onto the bus bar in order to join the wire to it?
Q2: How exactly do I join it - do I just use a ton of solder?
Q3: Since there are two bus bars - each carrying 150A each - that means two wires. Eventually, those two will have to combine together. Do you know of any "Y splitter"'s for 2/0 gauge wires that I can get? What's the common way of joining together two wires?
All 2/0 AWG.