coinmaster
10 W
- Joined
- Jun 13, 2017
- Messages
- 93
I'm using a cyclone 3000 on a KMX trike and I took it out into the rain yesterday, I covered the electronics in bubble wrap to avoid getting them wet but I ran into this monsterous puddle that I couldn't avoid and almost submerged the bike in it.
After that I checked the electronics and they seemed to be relatively okay but a few minutes later the motor stopped moving.
The lights turn on on the throttle but the motor does not move. I tried replacing the controller with another known working controller and the motor still does not move.
I don't understand What could have happened. I have doubts whether the motor could have died from this incident, I'm thinking maybe the throttle is to blame?
After that I checked the electronics and they seemed to be relatively okay but a few minutes later the motor stopped moving.
The lights turn on on the throttle but the motor does not move. I tried replacing the controller with another known working controller and the motor still does not move.
I don't understand What could have happened. I have doubts whether the motor could have died from this incident, I'm thinking maybe the throttle is to blame?