Hi, please kindly help me to me, I'm new in this thing. I had this ebike speed controller, I had just brought an throttle to connect to this ebike, But when I open up and take out the speed controller and find out , is different from the throttle connection. I only can find some of the connection from the speed controller that is free from connection anything. I hope someone kindly advice me how to go about, and how to connection it. Me now very very confuse there is red, green and black from the throttle don't know how to connect to this speed controller, there are 4 different colors. Your kind help will be very much appreciated. below are some of the picture I took. Thanks thanks.
Can anyone kindly help me. urgent
- Thread starter yeongkwe
- Start date
Educated guess...
Throttle:
black - ground
Red - 5v positive
Green - throttle signal
Controller:
Black - ground
Red - 5v positive
White - throttle signal ( either that or orange lol)
To test which is which you need a multimeter and following this link... http://www.ebikes.ca/documents/ThrottleTesting.pdf
But are you sure that is the correct connector on the controller? Surely it would have 3 wires like the throttle if you bought it as a whole kit
Throttle:
black - ground
Red - 5v positive
Green - throttle signal
Controller:
Black - ground
Red - 5v positive
White - throttle signal ( either that or orange lol)
To test which is which you need a multimeter and following this link... http://www.ebikes.ca/documents/ThrottleTesting.pdf
But are you sure that is the correct connector on the controller? Surely it would have 3 wires like the throttle if you bought it as a whole kit
Similar threads
-
- Question
