Sabvoton (MQCON) SVMC72150 controller with Bafang 750C Display

Hello fellow ebikers, few months ago i decided to build an ebike and right now i pulled trigger finally, been reading a lot here what parts to choose and decided to go with sabvoton controller (150A model) and i want to pair it with 750C TFT display.

I already ordered this https://bit.ly/2zr1nAQ controller from QS motor but dont know how and if its possible even to connect it with 750C display.

This is the wiring of the controller

I know there are kits with controller and with display like this one https://bit.ly/2ONStCK

But i found out about this before i ordered controller separatly, So is there anybody who found out how to connect it together ?

Heads up, your link shortener is giving me "403 Forbidden" on both your links.

// Edited... it was working for me, maybe it was country specified, try it now please

No, I don't think you can use the Bafang display for anything other than a Bafang.

Well these guys using it with modified sabvoton controller https://bit.ly/2ONStCK

Display looks like OEM part and companies edit logo on it pretty much
https://www.youtube.com/watch?v=w7-k-G0DuvY

N3mam said:

Well these guys using it with modified sabvoton controller https://bit.ly/2ONStCK

Display looks like OEM part and companies edit logo on it pretty much
https://www.youtube.com/watch?v=w7-k-G0DuvY

Click to expand...

It may be the same hardware, but the communication protocol is most likely different and gets programmed into the display when it is made. It may be possible to re-flash the firmware in the display but you would need the code.

Hi did you ever resolve this issue?
I’m in the same boat