Good information about Galvanic Corrosion and carbon fiber epoxy on aluminium. That's not a factor if you use a lock and key system to brace the aluminium. It is only a worry if you carbon fiber onto a flat surface like a bond, only as a glue. If you wrap CF around aluminium, it's set in stone.
For you guys who have awesome bikes that you ride until the frame fatigues, it's very useful. Just wrap CF around your old bike and you can recycle very expensive frames with a restricted stress zone or a bad weld. Because, if you braze aluminium welds, you have to temper the entire frame at 800 degrees for a day and at 400 for another day. That's how aluminium frames are prepared. Carbon fiber is a low temperature fix for aluminium frames.
When we can 3D print carbon fiber tools from the web, it can be the fastest way to customize mismatched torque arms. If you 3D print a mould and stuff it denseley with the epoxy, it can be fun too!
This is a 2 hour bike fix which is way over the top, it you could lift a car on it. download/file.php?id=206072&t=1