Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Get all your technical information about electric bikes here.
User avatar
icherouveim   1 kW

1 kW
Posts: 319
Joined: Aug 20 2015 5:17am
Location: Cyprus

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by icherouveim » Jun 21 2019 11:34am

agniusm wrote:
Jun 21 2019 10:52am
Would be great to have clarification on this. What will work and what most likely damage components. If it boost boosts voltage, and no exactly matched dc source is needed, that would be so awesome. Its a mess having all these different chargers. Wander if i have 2 of these, one running 48v another 72, would one 40V 20A psu do them both?
I will tell you how it works. The ideal situation is when your psu voltage is close to your empty battery voltage and no more otherwise you won't be able to control the charging amps.
When you have low psu voltage let's say 12-24v the harder is for the controller to step up the voltage and also harder for the motor because of the high amps.
For 20S battery pack I use 57V psu and it works very efficiently. When I use my 24V psu the controller heats up more and also I lose energy with the high voltage conversion.

antix   1 µW

1 µW
Posts: 2
Joined: May 15 2016 4:57am

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by antix » Jun 22 2019 9:06am

j bjork wrote:
Jun 20 2019 2:08pm
But strange anyway that they are not posting about how happy they are :?
If there where problems I guess they would post about that anyway..
I like my 12F a lot :bigthumb:

Jonno   100 W

100 W
Posts: 144
Joined: Sep 30 2016 6:41am
Location: UK

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonno » Jun 22 2019 11:09am

Nice Video.......can't wait for my 24F :)
Modified EEB frame, 888 forks, 280mm stiffer rear shock, QS273 40h V3 , Nucular Electronics 24F controller, 92V @ 36ah 26650 cells, 300a BMS, Hope V4 + Variable regen braking

User avatar
icherouveim   1 kW

1 kW
Posts: 319
Joined: Aug 20 2015 5:17am
Location: Cyprus

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by icherouveim » Jun 22 2019 12:17pm

antix wrote:
Jun 22 2019 9:06am
j bjork wrote:
Jun 20 2019 2:08pm
But strange anyway that they are not posting about how happy they are :?
If there where problems I guess they would post about that anyway..
I like my 12F a lot :bigthumb:
Nice video!
Does the motor work more efficiently and at lower temperatures with this controller?

antix   1 µW

1 µW
Posts: 2
Joined: May 15 2016 4:57am

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by antix » Jun 22 2019 1:03pm

icherouveim wrote:
Jun 22 2019 12:17pm
Does the motor work more efficiently and at lower temperatures with this controller?
Cannot really comment on that. I ran a 60A controller without a display before this.

User avatar
bigbore   10 kW

10 kW
Posts: 531
Joined: Sep 25 2009 7:43am
Location: Italy

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by bigbore » Jun 25 2019 2:39pm

Merlin wrote:
Jun 20 2019 1:34pm
j bjork wrote:
Jun 20 2019 1:09pm
To get the full (setup)speed with only a little throttle is expected in torque throttle mode, when you don´t have any load.
Because you don´t control speed (voltage), you control torque (amps). Very little amps are needed to run at full speed without load.

I am curios, are you one of the first to get your controller? :)
no...there are some out there. looks like they are riding now only all time and dont strart posting :D
or maybe the sphere dies. who knows ;(


English subs available:




@devo,

in control:
Speed mode = Ref. speed
setup Reference speed = 100
100 means kph...if you have 50 on Mode 1 then you should reach 50kph.

with FOC settings you benefit some % of efficiency + sinewave (no square noise) and you can setup flux weaken to get more topspeed.

you can setup all 4 Buttons as you like. you can setup one button as a toggle between S1-S2-S3
or simple put S1 on Button, S2 on Button 2, s3 on Button 3

any maybe on Button 4 -> cruise.
Beautiful video :bigthumb:
Is there the option of a password protected "eco mode" maybe when the controller is turned on?

User avatar
Merlin   10 MW

10 MW
Posts: 2015
Joined: Jan 29 2013 10:00am
Location: europe

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Merlin » Jun 25 2019 3:05pm

you can setup a password for the use of the display. not for a single mode (atm)

User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonboy » Jun 27 2019 2:18pm

This may be a dum question :shock: but I assume the 12f supports variable regen braking .. as in a hall & magnet installed on lever? I've run both my maxes this way and I love it ?

User avatar
Merlin   10 MW

10 MW
Posts: 2015
Joined: Jan 29 2013 10:00am
Location: europe

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Merlin » Jun 28 2019 6:45am

its the same as a throttle. so yes sure works also.

User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonboy » Jun 28 2019 12:16pm

@ Merlin ... Thanks!

only just seen the schematic .. Happy days!

A couple of weeks back I'm sure i found a new nucular website.. Whats the address?

Not long now!! :wink:


User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonboy » Jun 28 2019 12:26pm

I was just about to edit my post ... lol ! just found it :bigthumb:

Thanks

User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonboy » Jun 30 2019 12:00pm

Evening.. Just wondering what bms people are using with the 12f, I'm runing 20s so it's a while before the integrated Nucular is about.. with 16s first

User avatar
Offroader   100 MW

100 MW
Posts: 2568
Joined: Sep 08 2013 9:03pm
Location: USA

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Offroader » Jun 30 2019 5:40pm

I would personally just run the cells to 6s or 4s jst xh connectors and use a cell checker every so often to make sure everything is balanced. I ran one of my bikes for almost 2 years without any BMS. While I guess you are taking a chance with this it should be no problem until you get your Nucular BMS.

andrebandre   100 W

100 W
Posts: 108
Joined: Dec 02 2015 8:17am

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by andrebandre » Jun 30 2019 9:44pm

Nuked Rhino!
Image

devo1223   100 W

100 W
Posts: 232
Joined: Nov 06 2012 4:32pm
Location: Lake Tahoe,CA

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by devo1223 » Jul 01 2019 11:57am

Is that the cyc motor with nucular?
Vector lite stuffed with 30Qs
Mxus 3k turbo 3t in 17in moto rim
viewtopic.php?f=3&t=92531&p=1353484&hil ... e#p1353484

andrebandre   100 W

100 W
Posts: 108
Joined: Dec 02 2015 8:17am

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by andrebandre » Jul 02 2019 5:20pm

devo1223 wrote:
Jul 01 2019 11:57am
Is that the cyc motor with nucular?
Yes it is a 12FET Nuke.
Vasily stood by me all the way and helped me get it going like a champ.
Here are some pics with the intended battery, 20S10P from EM3EV.
A little big and bulky but who cares about proportions when i got a crotch rocket.
With a little luck i will have a 3D printed enclosure for it from a forum member.
Image
Image

User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonboy » Jul 05 2019 10:45am

@ Vasili or anyone who knows.. When the bms units become available I assume they will connect to the CAN socket inside the controller and there will be new firmware out to support it?

also i guess the 24s bms will support anything upto 24s too?

Thanks

Jon


briangv99   100 W

100 W
Posts: 231
Joined: Jan 15 2008 4:14am
Location: Canberra, Australia

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by briangv99 » Jul 05 2019 5:17pm

HI VasiliSk,

does your controller support regen switching to active braking at low speed?

thanks

User avatar
Merlin   10 MW

10 MW
Posts: 2015
Joined: Jan 29 2013 10:00am
Location: europe

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Merlin » Jul 05 2019 5:26pm

yes it does =)


coming from a big offroad tour. still impressive. controller doesnt heat up more then 50°c @ full throttle :D
i think my gearing is too short to heat up this freakin awesome controller :D

briangv99   100 W

100 W
Posts: 231
Joined: Jan 15 2008 4:14am
Location: Canberra, Australia

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by briangv99 » Jul 05 2019 5:33pm

Thanks Merlin,

This controller really does it all and more!

User avatar
Jonboy   100 W

100 W
Posts: 296
Joined: Aug 18 2013 9:48am
Location: S. Wales

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Jonboy » Jul 11 2019 7:01am

I'm really liking mine!! :flame: Great work!!

Anybody getting a quite grumble noise from the hubby on regen in the 10-5kph area.. It's no problem, just be nice to dial it out and be TOTALLY silent :D

User avatar
brumbrum   100 kW

100 kW
Posts: 1359
Joined: Oct 30 2010 3:29pm
Location: Wales U.K

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by brumbrum » Jul 30 2019 5:55am

Sub'd
My NYX and cromotor build
viewtopic.php?f=6&t=74615
My LMX 161 dirt bike build
viewtopic.php?f=6&t=94074

Aeron   10 W

10 W
Posts: 84
Joined: Jun 12 2018 8:04am
Location: Europe

Re: Nucular Electronics owner's thread (setup infos, FW updates, links etc.)

Post by Aeron » Jul 30 2019 7:28am

I'm really happy with this controller. Really good stuff.
I was a bit overwhelmed by all the settings at first, but taking my time and reading the wiki I managed to get it working without burning anything (yet). This is my first ebike/controller.
I still have a lot to understand before I can use this device at its full potential, but so far I am having a lot of fun with it.
Merlin wrote:
Jun 20 2019 1:34pm
you can setup all 4 Buttons as you like. you can setup one button as a toggle between S1-S2-S3
or simple put S1 on Button, S2 on Button 2, s3 on Button 3
Not that it bothers me a lot but my 6F defaults to S1 (S2 stated in wiki) and I can't assign S1 to any button (it just does not appear in the possibilities when I setup the buttons). Am I the only one ?

Post Reply