Em3ev jumbo shark charger connection

Hi all!
I am waiting on my first kit. A BBSHD. With a 52v 17ah jumbo shark from em3ev.

I need to order a quality charger so I can get riding asap.

Looks like the charger I want from luna has an xt60 connector and eemv says the jumbo shark uses an anderson power pole connector.

Is that correct and what is the best way to set up an adapter.

Is 12 guage wire thick enough to handle the current if I make my own?

B.E. Coyote said:

Is 12 guage wire thick enough to handle the current if I make my own?

Click to expand...

Not familiar with the charger but 12 gauge should work if the charger is 30 amps or less. Could be overkill, if your charge rate is less.

I made short jumpers with connectors on each side to cover the two interfaces for my main battery wires running to the controller. The other rout is to cut off one set and solder in the connector type you’d like to make your standard.


Sent from my iPhone using Tapatalk