Bafang Ultra Max Reprogram

Get all your technical information about electric bikes here.
Post Reply
MN Slick   1 µW

1 µW
Posts: 2
Joined: Oct 30 2018 8:36am

Bafang Ultra Max Reprogram

Post by MN Slick » Jan 02 2019 1:53pm

Does anyone know if the Bafang Ultra can be programmed to perform like the BBSHD on hill climbs? I use my bike for hunting and want the motor to do the work like the BBSHD and BBS0@ do. In short, I do not want to exert myself at all and sweat. The stock setting on the Ultra is terrible for my application. Not researching deep enough into how the Ultra performs was a big mistake. Anyway, I have the programming software and have done some experimenting but am not there yet. Sometimes it seems ok but other times its a dog. The factory is no help and Bafang did not respond. I’ve researched but have found relatively little on the Ultra. Karl’s Special Sauce was not special for my application nor was the youtube video that is out there so I assume these reprograms are more for sport/trail riding applications.

Anyone have any guidance or suggestions?

Thanks

User avatar
Deafcat   100 W

100 W
Posts: 167
Joined: Aug 13 2015 1:25pm
Location: City of Bridges (in the Canada Rectangle)

Re: Bafang Ultra Max Reprogram

Post by Deafcat » Jan 04 2019 2:59pm

Switch to Sport Mode (hold down + button), then set to max assist. This puts the Ultra motor into max power, cadence-driven mode, which will feel more like the HD.

MN Slick   1 µW

1 µW
Posts: 2
Joined: Oct 30 2018 8:36am

Re: Bafang Ultra Max Reprogram

Post by MN Slick » Jan 09 2019 10:36am

I'm on Sport but don't see where to set at max assist. Is it on the controller?

Post Reply