SunPoweredWorldTour
100 mW
- Joined
- Sep 9, 2017
- Messages
- 40
I have two 52 Volts battery and 2 motors. if I used both motor at maximum capacity I consume about 2200 watts
I was using 10 gages cabling but I had problem with my Anderson connector because the cable were too big to fit in the connector.
I want to switch to 12 gage. I will have about 4-5 feet of cable between the batteries and the splitter that goes to each motor.
I would like to know if it is ok.
I was using 10 gages cabling but I had problem with my Anderson connector because the cable were too big to fit in the connector.
I want to switch to 12 gage. I will have about 4-5 feet of cable between the batteries and the splitter that goes to each motor.
I would like to know if it is ok.