3d printable battery mounts for ebike Recumbent conversions

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.
Post Reply
geeksville   10 W

10 W
Posts: 89
Joined: Aug 02 2019 6:44pm

3d printable battery mounts for ebike Recumbent conversions

Post by geeksville » Aug 05 2019 1:27pm

Hi ya'll,

So I started helping out on @casainho's cool TSDZ2 because it looked like a fun SW project to futz with. And I got sucked into spending a bunch of time on the SW102 display software. I've only just now gotten around to installing the TSDZ2 on my bike. It is a recumbent bike so the standard locations to mount the battery are not really suitable, so I caded up some adapter brackets, here they are in case they are useful for anyone else:

https://imgur.com/a/Io1Ky6V
https://www.thingiverse.com/thing:3788903
Image

Lubin   100 µW

100 µW
Posts: 7
Joined: Oct 04 2019 3:59am
Contact:

Re: 3d printable battery mounts for ebike Recumbent conversions

Post by Lubin » Oct 04 2019 4:07am

Hi ,

Looking at the way you attached the TSDZ2 to the frame without using using the TSDZ2 sandwith system which is not compatible with all frames.
How did you adjust parts to make theses firmly attached ? don't you get any slock ?
Btw, not sure I can reach such design. I am thinking about using hose clamp ring.

Post Reply