BBSO2B Motor upgrade with BBSHD controller

Agro86

1 µW
Joined
Nov 6, 2021
Messages
4
Hi
I have a spare 1000watt BBSHD controller left over as I upgraded to the phaserunner.
I also have a 750watt BBS02B and I am wondering if anyone has tried or knows if installing the BBSHD controller into the BBS02B would be possible?
 
It is possible without any problems. I mounted the BBSHD driver on the BBS01 and it works great, I just had to change the housing.
 
yep got it all done and works well but found that the temp sensor was limiting the power. i used a resistor from the negative to the temp wire to clear the fault however now i must be careful to not over heat the motor but it has been running well for some time now
 
Back
Top