i wasnt able to check the controller's progrmed settings yesterday
as i was out for the morning and had several buddies call by in the afternoon
for a drink and chat i manage to drop some sanded pads in the front Hope calipers
and bled the rear brake ran out of time for Kelly programing' sooo hopefully can get to that to day although hehe
I broke the rules laid down by Karan and took the bike for a hammering up and down the street
in the afternoon, with karan watching no less hehe, the thing FLOGS so much quicker than with
the Infineon, blew me away, easily fastest e-.bike i have built to date!
the difference and the throttle control is UNBELIEVABLE with the Kelly controller, smooth jitter
free acceleration from stop to full throttle, just kept pulling hard in second gear upto 75km/hr when
i had to brake coz ran out of road
I got from stand still to 75km/hr in a ~100meters
I need to take it out on a Looooong straight road and see what the top speed is
on level flat ground, its done 95km/hr down welshpool road and was rock solid stable
so im not at all concerned with the handling side of it...im estimating it will
be close to 85-90km/hr with the 17tooth sprocket on the first stage reduction
dropping the larger 20tooth on would produce speeds i dont want to do LOL
the acceleration now is phenoenaml and am more than happy with the
bike in current trim, just what i was after.
@Rodney, i think you need a smaller wheel for your frock
and more lipo to keep up now teehehe
@Thud you MUST get a Kelly conroller
night and day diference from those pissy Infineons! Thanks again Toolman2 for
convincing me the Kelly was worth the $$$'s
Its pissing rain today, of course so zero chance of a video i think
if it dries up ill get a short clip of the acceleration from stop though
It WILL do power monos without doubt! Just need a lil
back with more when i can bois
EDiT..Just went and checked the Cycle Analyst hehe AMax 141!! @ 72.6v not fully charged battery
so what we have, 10000+watts peak amps pulled from launch through first gear! I only did one run
motor temp was well, steel cold as was contoller LoL..
EDiT2 ... for those interested i checked the Kelly controller specs-->
•Peak Phase Current, 10 seconds: 350A.
•Continuous Phase Current Limit: 140A.
•Maximum Battery Current: Configurable
DEFINITELY has the Ooomphf to melt my motor LOL