Leebolectric
1 kW
Here's my newest build, a Santa Cruz Batman (bantam) with the LunaCyclone kit.
This bike will be getting a custom TangentAscent kit...should be epic, gonna upgrade a few parts before then.
So, while I wait for that kit, I wanted to try one of these Cyclones and get it tuned up for one of my nephews bikes.
Size large Santa Cruz Bantam, super deal on NEW frame from CompetitiveCyclist right now.
RockShox Pike 150mm, charger damper. Fox CTD rear shock.
Tetra levers on AvidBB7S...new version is lighter weight and all black.
X9 10sp shifter and XO DH horizon derraileur.
Canfield Crampon Ultimate pedals, so thin and grippy.
LunaCyclone kit, 14t HD motor freewheel, HD crank freewheel.
14:37 motor to crank, 32:11-36 crank to cassette, 52v20ah25rPack
Heavy Duty SickBikeParts freewheels, beefy half-link chain gives less slack for the tensioner to accommodate
11-36 SRAM1050 cassette with SRAM XO DH derraileur.
NEW BB7S...lighter and BLACK, Avid finally upgraded them...I keep dreaming of a real light weight version though.
Wonky throttle with on/off switch, encased all wires with fiberglass and heat shrink tubings for ruggedness.
Old neoprene shin-guard makes a nice cover for the electronics.
View attachment 3
View attachment 2
I bought more of the MEGA-Zip-Ties...two fit perfectly into the motor's groove, and two more pull it upward to the downtube.
The plastic layer protects the frame too...seems quite solid.
View attachment 1
This bike will be getting a custom TangentAscent kit...should be epic, gonna upgrade a few parts before then.
So, while I wait for that kit, I wanted to try one of these Cyclones and get it tuned up for one of my nephews bikes.
Size large Santa Cruz Bantam, super deal on NEW frame from CompetitiveCyclist right now.
RockShox Pike 150mm, charger damper. Fox CTD rear shock.
Tetra levers on AvidBB7S...new version is lighter weight and all black.
X9 10sp shifter and XO DH horizon derraileur.
Canfield Crampon Ultimate pedals, so thin and grippy.
LunaCyclone kit, 14t HD motor freewheel, HD crank freewheel.
14:37 motor to crank, 32:11-36 crank to cassette, 52v20ah25rPack
Heavy Duty SickBikeParts freewheels, beefy half-link chain gives less slack for the tensioner to accommodate
11-36 SRAM1050 cassette with SRAM XO DH derraileur.
NEW BB7S...lighter and BLACK, Avid finally upgraded them...I keep dreaming of a real light weight version though.
Wonky throttle with on/off switch, encased all wires with fiberglass and heat shrink tubings for ruggedness.
Old neoprene shin-guard makes a nice cover for the electronics.
View attachment 3
View attachment 2
I bought more of the MEGA-Zip-Ties...two fit perfectly into the motor's groove, and two more pull it upward to the downtube.
The plastic layer protects the frame too...seems quite solid.
View attachment 1