cascarabias wrote: ↑
Oct 11 2018 3:04am
hello, what problems does firmware V0.13 cause? I use it every day to climb great slopes by mountain and I have only observed that with increased energy consumption, less kmts of travel compared to the original software of the tsdz2. It can be this by the screen configuration. I do not find any other problem.
do you have 48v or 36v motor?
did you correctly configure the motor voltage in the configuration?
i can only tell that with opensource firmware (0.12 at the moment) my bike is much more efficient ( and controllable) than with the original firmware. it saved me from buying a bigger battery!
i travel 25km at 40km/h average 2 times a day and with the opensource firmware i am now only using about 140wh one way.
so my 200wh battery is safe.
before it was hard to judge how much energy i am consuming. sometimes i used 200wh sometimes 150wh... (depending on wind...)
now i just stay at average 250watt and everything is fine.
i rode now 100km with the open source firmware and i am really happy.
i am also loving the boost function!
however i changed the boost time to 1.2 seconds and boost fade to 3.5 seconds.
this makes the bike much more agile and consistent!