cbobgo
1 mW
I have the Luna Cyclone 3000 mid-drive, and have read on the other threads about the 3 power modes, #2 is default, #1 is slower and #3 is faster. For some reason, even when following the directions other's had posted, all 3 modes seems to give me the same top speed.
We first tried installing a 3 way switch, but made no difference in any position. Then took off the switch and bipassed directly 1 wire at a time from the center to each side, made no difference. Then tried it again, this time using a 33 ohm resister one at a time to each of the outside wires and still it made no difference. Does anyone have any other ideas we could try?
- bob
We first tried installing a 3 way switch, but made no difference in any position. Then took off the switch and bipassed directly 1 wire at a time from the center to each side, made no difference. Then tried it again, this time using a 33 ohm resister one at a time to each of the outside wires and still it made no difference. Does anyone have any other ideas we could try?
- bob