Bafang MAX drive (250W) readout

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.
maz0n1   1 µW

1 µW
Posts: 1
Joined: Jun 18 2018 2:00am

Re: Bafang MAX drive (250W) readout

Post by maz0n1 » Jun 18 2018 2:06am

I tried that cable "hiekkis" mentioned to connect thumb throttle to max drive. No dice. Connector is different to controllers end.
Next i will try bafang ultra drive eb-bus cable.
I have a 48v version max drive 350w with 17A controller. Runs great 100% keep current ja current decay 8.
Fat bike frame slowers down top speeds, but tops out at ~42km/h with clown pedalin on flat :)

dannyb0uy   1 µW

1 µW
Posts: 1
Joined: Oct 31 2018 4:29am

Re: Bafang MAX drive (250W) readout

Post by dannyb0uy » Oct 31 2018 4:31am

Any luck with the thumb throttle?

brikmange   1 µW

1 µW
Posts: 1
Joined: Nov 22 2018 7:52am

Re: Bafang MAX drive (250W) readout

Post by brikmange » Nov 22 2018 8:02am

Hi! New here, and been reading this thread a lot. I've got an Evobike mid engine 8 geared bike. Thinking about maybe reprogramming my 250w engine to make it 350w. Anyone got readouts of factory setting for a 36v 350W max drive? @Elenhinan, where did you find info about that the sw06 controller is good for 350w?

Well, first I need to check if I can access the connection port easily, and then find a programming cable. If so, let's see. :)

Bikegirl   10 W

10 W
Posts: 66
Joined: Apr 02 2019 5:30am

Re: Bafang MAX drive (250W) readout

Post by Bikegirl » Jun 19 2020 4:38pm

Great info guys,
It ha got me thinking, would it be possible to over volt my mm G330. 350 from 48v to 52v?

Or would it be worth changing controller to do that?

Rosse   1 µW

1 µW
Posts: 1
Joined: Aug 08 2020 9:20am

Re: Bafang MAX drive (250W) readout

Post by Rosse » Aug 08 2020 9:24am

Where do i download this tool/software?

Post Reply