Page 2 of 2

Re: Mid-Drive Build - comments and recommendations welcome

Posted: Dec 05, 2017 9:09 pm
by FlightService
At 250lbs I am thinking 15S4P but shallow charge them to 4.05 for a 60V 12.6 aH with the ability of a 120amp MAX rated discharge! NCR20700A cells from a Bosch/Dewalt packs.

Re: Mid-Drive Build - comments and recommendations welcome

Posted: Dec 06, 2017 5:28 am
by Buk___
markz wrote:
Dec 04, 2017 9:07 pm

What I notice is for every 62V 6Ah 10S4P brick ...
"62V" and "10S" does not seem to equate?

Re: Mid-Drive Build - comments and recommendations welcome

Posted: Dec 06, 2017 4:04 pm
by markz
I do not charge to 4.20V/cell, but I charge the entire pack to 62 instead of 63

Re: Mid-Drive Build - comments and recommendations welcome

Posted: Dec 06, 2017 4:15 pm
by Buk___
markz wrote:
Dec 06, 2017 4:04 pm
I do not charge to 4.20V/cell, but I charge the entire pack to 62 instead of 63
Hm. 62V / 10S = 6.2/cell? Special cells!

Re: Mid-Drive Build - comments and recommendations welcome

Posted: Dec 06, 2017 4:19 pm
by markz
Oh hehehehehe yeah 15S my bad
:oops:
brain fart

I am in between reconfiguring my packs from 15S to 10S to get more capacity (Ah).

Re: Mid-Drive Build - comments and recommendations welcome

Posted: Dec 07, 2017 10:48 am
by FlightService
maybe I missed it but what controller are you using? Going from a 60V to a 40V pack seems like you would loose alot of speed.