Need info on Programming a Bafang Max mid drive

Mr.Noodle · Post by **Mr.Noodle** » Nov 22, 2017 5:19 pm

Hello, Looking for some info on programming my Bafang Max Mid drive. Right now I'm using a 36V 11ah but would like program my controller for 48V 17ah. First off is this even possible ???
I already have the programming cable and software ready to go. Done a pile of reading......just cant find much on programming the Bafang Max Mid Drive.

Thanks .... any info is appreciated.

Post by **fechter** » Nov 22, 2017 6:12 pm

As far as I know, it uses different software than the BBSHD or 02. What software do you have?

Mr.Noodle · Post by **Mr.Noodle** » Nov 23, 2017 12:19 am

The software I have is the Bafang Configuration Tool. Probably used for the BBSxx motors. I havn't tried it yet.
viewtopic.php?f=28&t=85918&p=1256881
Just trying to find out more info on how to program the Max. I'm finding info hard to find.

Thanks

Mr.Noodle · Post by **Mr.Noodle** » Jan 06, 2018 1:15 pm

I'm still looking for info.

If anyone has info on programming the Bafang Max controller from 36V to 48V I would greatly appreciate it.

Thanks,
Mr.Noodle

Marin · Post by **Marin** » Jan 06, 2018 1:42 pm

some info here

https://endless-sphere.com/forums/viewt ... 28&t=91035

Endless Sphere

Need info on Programming a Bafang Max mid drive

Need info on Programming a Bafang Max mid drive

Re: Need info on Programming a Bafang Max mid drive

Re: Need info on Programming a Bafang Max mid drive

Re: Need info on Programming a Bafang Max mid drive

Re: Need info on Programming a Bafang Max mid drive