PAS w bbshd

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.
Post Reply
Jost   10 mW

10 mW
Posts: 25
Joined: Mar 12 2017 10:14am
Location: Ft Myers Fl

PAS w bbshd

Post by Jost » Dec 25 2017 2:39pm

Need a little help.

I obtained the BBSHD hot rod tune, 750c display, big batt, accessories from Luna. Put it on my cannodale catalyst and over all, runs great.

My question is, even after changing to 9 pas levels, pas level 1 provides +- 400 w (faux pedaling), 2 is at around 600 w.......... is there a setting I'm missing on the display that would adjust the pas amounts? I haven't seen a lot on this display, more of what it can't do (menu items that don't change etc) then what it does and some of that was still being confirmed.

Thanks for any help.

Jim

User avatar
fechter   100 GW

100 GW
Posts: 12911
Joined: Dec 31 2006 3:23pm
Location: California Bay Area, USA

Re: PAS w bbshd

Post by fechter » Dec 25 2017 4:45pm

You need the programming cable and the PC software to make changes to the PAS level settings. There are several topics about it somewhere.
"One test is worth a thousand opinions"

Jost   10 mW

10 mW
Posts: 25
Joined: Mar 12 2017 10:14am
Location: Ft Myers Fl

Re: PAS w bbshd

Post by Jost » Dec 28 2017 9:52am

Thanks, thought that might be the case. Just isn't much to work with through the display.......

Post Reply