Hey,
I'm a proud owner of Cyclone 3000W.
Photo of the bike: https://drive.google.com/file/d/1sa0cghvESHISYk6YMCUjbgmqVF5QzKmI/view?usp=drivesdk
I'm now using single speed drive train: 14T motor freewheel drive 44T chainring, 40T front chainring drive Surly 17T rear cog.
My battery is homemade, 13S6P, 54.6V off charge, 15A, 60Amps peak. Samsung 25R cells.
I'm using the stock controller, but I enable the high RPM mode.
My top speed is 35 MPH. Cruise at approximately 28 MPH.
I'm looking for increase my speed. I'm considering using 36T chainring on drive chain (motor-crank), instead of the 44T chainring.
From your experience, will it work?
May you suggest another way to increase the speed, by only changing the gear and without wear the motor.
Thank in advance!
I'm a proud owner of Cyclone 3000W.
Photo of the bike: https://drive.google.com/file/d/1sa0cghvESHISYk6YMCUjbgmqVF5QzKmI/view?usp=drivesdk
I'm now using single speed drive train: 14T motor freewheel drive 44T chainring, 40T front chainring drive Surly 17T rear cog.
My battery is homemade, 13S6P, 54.6V off charge, 15A, 60Amps peak. Samsung 25R cells.
I'm using the stock controller, but I enable the high RPM mode.
My top speed is 35 MPH. Cruise at approximately 28 MPH.
I'm looking for increase my speed. I'm considering using 36T chainring on drive chain (motor-crank), instead of the 44T chainring.
From your experience, will it work?
May you suggest another way to increase the speed, by only changing the gear and without wear the motor.
Thank in advance!