Spare three-button control for DPC-14?

Discussions related to motors other than hub motors.
This includes R/C motors, botttom bracket, roller and geared drives.
Post Reply
User avatar
PacoMarkE   10 mW

10 mW
Posts: 25
Joined: Dec 13 2016 12:37am
Location: suburbs of St. Paul, Minnesota

Spare three-button control for DPC-14?

Post by PacoMarkE » Apr 07 2018 9:05am

Hi friends,

The three button control on my DPC-14 is acting a bit oddly. To get the UP button to recognize I have to push hard and in a specific location. It's still functional but I wanted to get a replacement and unfortunately Luna is no longer selling them.

It seems a waste to replace the entire control unit when all I need is the three button control.

A couple questions:
  1. Anybody have a spare around or a lead on where to get a replacement part?
  2. Anybody ever repaired one of these? Taken one apart? Like I said it still functions okay, I think maybe a small plastic part that depresses the actual "up" switch has just worn out.

Many thanks, Mark in Lake Elmo, MN


This is the part I'm hoping to repair/replace:
Image


Part of this Unit:
Image

tomjasz   1.21 GW

1.21 GW
Posts: 3831
Joined: Mar 29 2014 1:45pm
Location: Out riding, MN USA
Contact:

Re: Spare three-button control for DPC-14?

Post by tomjasz » Apr 07 2018 12:21pm

California eBikes, best source of parts!
Attachments
Screen Shot 2018-04-07 at 12.20.11 PM.png
Screen Shot 2018-04-07 at 12.20.11 PM.png (90.36 KiB) Viewed 268 times
Thanks Justin_le we're here thanks to you. All the best to the mods for their tireless work keeping it on an even keel.

User avatar
PacoMarkE   10 mW

10 mW
Posts: 25
Joined: Dec 13 2016 12:37am
Location: suburbs of St. Paul, Minnesota

Re: Spare three-button control for DPC-14?

Post by PacoMarkE » Apr 08 2018 11:32am

Thanks for the tip tomjasz!

Post Reply