Cyclone 3000 waterproof connector issues

endrew

10 W
Joined
Apr 7, 2018
Messages
92
I got a Cyclone3000 with the waterproof connectors, seen in the image.
The problem is I want to use a different controller than the stock one, so I need make a new cable that can connect to the motor.
does anyone know the name of this connector? Or the pinout (encoder signals, supply etc...)

Thanks!
 

Attachments

  • IMG_20190118_202906.jpg
    IMG_20190118_202906.jpg
    203.7 KB · Views: 420
endrew said:
I got a Cyclone3000 with the waterproof connectors, seen in the image.
The problem is I want to use a different controller than the stock one, so I need make a new cable that can connect to the motor.
does anyone know the name of this connector? Or the pinout (encoder signals, supply etc...)

Thanks!

I don't think they are all used. It is just the usual 3 big phase wires and 5 halls wires. You can look up wiring diagrams on this forum.
https://endless-sphere.com/forums/viewtopic.php?t=3484
 
I only see 3 large and 5 small pins. So big ones are phase and little ones are halls.

EDIT: Oh I see the little one in the center now.
 
Back
Top