Liberty Stealth Climber (MTB)

General Discussion about electric bicycles.
Post Reply
User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Liberty Stealth Climber (MTB)

Post by DrkAngel » May 29 2019 12:08pm

Looking for parts-n-such for Liberty Stealth Climber - MTB.
Picked up an "Antique?" "Vintage?" eBike for $50


Image

Missing key (lock is welded into fork)
OEM brake pads (worn out)
Battery pack - empty (missing) - will build own, but housing-shell would be nice

Worth fixing up!
36V 450w 18mph motor
might run
48V 600+w 24mph?
designed for off road
200mm rear disc brake rotor
excellent F&R suspension
Only 6 speed, so would likely swap to 7spd with higher and lower gearing

Worst case, motor shot ... throw a 1000w on the rear? 200mm rotor looks to use standard mount.
A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

Electric Earth   1 W

1 W
Posts: 61
Joined: Nov 11 2018 8:02pm

Re: Liberty Stealth Climber (MTB)

Post by Electric Earth » May 30 2019 12:07am

That's a really interesting bike. Do you know what brand or how old it is? I wonder how it'll ride with the long wheelbase. Good and stable for high speed? Is the shock and fork "real" or just springs? That'll be a fun project. I vote for the high powered motor option! :D

markz   100 GW

100 GW
Posts: 7654
Joined: Jan 09 2014 11:38pm
Location: Alberta Canada

Re: Liberty Stealth Climber (MTB)

Post by markz » May 30 2019 12:27am

Battery is probably toast, so gut the inside, install whatever you want. Paint the case the same as the frame, black. V-type kick stand, paint motor black, install a stiff rear rack having the visuals move from the rear mud flap mount at the boxy black battery box then going straight up a few inches to get a swooping arc feature from the top of the installed battery box into the rack carrying area. Perhaps make the rear rack chunky? Atleast from the top of the battery, then thin the chunkiness of the rear rack into a regular rear rack look. Or just install LiPo's to lessen the visuals of the big boxiness of the stock battery box. Could probably reduce the side view width, as seen, by half using LiPo. Be the same width from the side angle, as the seat post. Green Multi-Stars from Hobbyking?

Edit: Maybe a Phaserunner in the stock controller location, bottom bracket box.
Perhaps a better visual, is to not have the battery go above that top bar, of the rear triangle. Then you could just have a thinner profile for the rear rack, coming off the mud guard mount, then a few stiffener bars for better bracing.
Looks like a 2nd chainring, perhaps its even a 3x7?8?
new ebike.jpg
new ebike.jpg (54.58 KiB) Viewed 837 times

markz   100 GW

100 GW
Posts: 7654
Joined: Jan 09 2014 11:38pm
Location: Alberta Canada

Re: Liberty Stealth Climber (MTB)

Post by markz » May 30 2019 12:39am

Here is a link, from Google Image Search
https://visforvoltage.org/forum-topic/b ... tric-bikes
EV Warrior bikes or Liberty Electric bikes
443 Mountain Bike
https://www.bike-forum.cz/foto/detail/14716-bike

https://visforvoltage.org/forum-topic/b ... ntain-bike


Edit:
Steel, 26", 6spd, 250W, 36V 8Ah, PAS
From a close up of their picture, looks to be a 1x6.
Note: Weight of Bicycle: 74 lbs. plus Battery Pack (20 lbs.)
Frame: Hi Tensil Steel
Rims: 26 in.Alloy with MTB Black Adonized Knife Edge
Tires: Aluminium Double Wall Profile 26" x 1.95 Off Road Type
Deraileur: SHIMANO, SIS 6 speed
Front Forks: MTB 26" Suspension Type
Brakes: Disc Brakes Front and Rear
Handlebars: Alloy
Mudguards / Fenders: Straight Plastic
Seat: Comfort MTB Style
Motor: 250 Watt Brushless Hub Motor.
Controller: 36 Volt DC Pedal Assist System Plus Speed Control Throttle!
Batteries: 36 Volt 8 ah High Power Sealed Lead Acid
(Optional Ni-MH 36v 8 ah batteries)
Charger: 36 Volt DC Output, 220/240 Volt AC Input intelligent Electronic
Charging Time: Dependant on use! 4 - 6 Hours
Max Speed: 15 mph with motor, faster with pedaling
PAS System: Economy Speed 12 mph
Range: 24-27 miles depending on Riders Weight,Road Conditions Etc
Normal Load recommended: Load 220 lbs.
Maximum Load: 275 lbs.
Weight of Bicycle: 74 lbs. plus Battery Pack (20 lbs.)
(Optional Ni-MH or Li-Ion batteries weigh 12/8 lbs)
Assembly Required: Pedals, Front tire, Front Fender (10 - 15 minutes)
Pricing:
Lead Acid: $625.00 plus $74 shipping
Ni-MH: $798 plus $71 shipping
Li-Ion: $995 plus $75 shipping


https://vilberg.blog.is/blog/vilberg/?offset=180

User avatar
Chalo   100 GW

100 GW
Posts: 7961
Joined: Apr 29 2009 11:29pm
Location: Austin, Texas

Re: Liberty Stealth Climber (MTB)

Post by Chalo » May 30 2019 2:08am

That's a super crappy bike. Don't spend a lot trying to make it into something it won't ever be.

It reminds me of the many times at the bike shop that I am faced with a bike that needs $200 of service to become a fully functional $40 bike.
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Re: Liberty Stealth Climber (MTB)

Post by DrkAngel » May 30 2019 11:34am

.
...
Info from 2006 posting

Liberty Stealth Climber.png
https://visforvoltage.org/comment/2037#comment-2037

Looks like I better go with the 1000w rear hub and save this 250w motor - controller for some Casual Cruiser ... if they even work?

.
A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

User avatar
neptronix   100 GW

100 GW
Posts: 14085
Joined: Jun 15 2010 5:56pm
Location: California refugee living in Utah, USA
Contact:

Re: Liberty Stealth Climber (MTB)

Post by neptronix » May 30 2019 12:51pm

That is an excellent chassis for a very comfortable high speed build. Steel, full suspension, battery space, and an extended wheelbase makes for ebike perfection. Because of the long wheelbase, it will be extremely stable at >20mph much like a motorcycle.

I would of course, toss all the electrics and replace them with something modern. That is an older low 80% efficient motor for starters. Blah.

The swingarm may be twisty and this might be a power limit. Or maybe not.

Looks heavy as sin but that is a plus if you're looking for theft protection. :mrgreen:
Good luck with the build!
"Love and compassion are necessities, not luxuries. Without them, humanity cannot survive." - Dalai Lama

My first major build: 1.6kW 8T MAC motor on a Trek 4500.
The new all-arounder: Leafmotor 1500w @ 4kW on a Turner O2 full suspension.
The monster scooter: 20" eZee on a Cannondale Semi Recumbent.
Whipper-snapper: ? on a lightweight BikeE Semi Recumbent

markz   100 GW

100 GW
Posts: 7654
Joined: Jan 09 2014 11:38pm
Location: Alberta Canada

Re: Liberty Stealth Climber (MTB)

Post by markz » May 30 2019 4:53pm

Most likely a brushed 250W motor because of the lead acid battery to cheap out on for the unsuspecting.

Toss the old rear suspension and throw in a quality air/coil, and a decent suspension fork. A good value one is the Suntour XCR
https://forums.mtbr.com/shocks-suspensi ... 40272.html
The hierarchy from low to high would be XCT, XCM, XCR. V2, V3 has to do with the 'version'. higher number is newer generation.

Forks specified by different bicycle brands can be configured in a number of different ways, so its hard for me to understand exactly what you are looking at, that being said;

Our XCM and XCR models come with 30mm stanchions. ( the upper tubes) if you compare this to other forks in the price range, many of our competitors will often use 28mm stanchions. Larger diameter = improved stiffness and strength. Also, the pitch, or width of these two forks is 130mm. You will find that to be a bit wider than many of our competitors. Generally speaking, wider is better.

Second, our XCM and XCR models are what we call QSP, or quick service products. That means if your fork's internals ever wear out our suffer a problem, the fork can be fixed easily by replacing the entire cartridge.

Finally, if you are shopping for a bike that is less than $1,000 I'm sure you have seen that many of those bikes are equipped with SR Suntour forks. The primary reasons for this are based on the fact that the bicycle brands have come to trust SR Suntour to supply them with a reliable product that performs well. (that may seem simple, but its a big deal) Additionally, we operate service centers in North America, Asia and Europe to back up our product.

User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Re: Liberty Stealth Climber (MTB)

Post by DrkAngel » May 30 2019 7:00pm

2009 videos





A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

User avatar
Chalo   100 GW

100 GW
Posts: 7961
Joined: Apr 29 2009 11:29pm
Location: Austin, Texas

Re: Liberty Stealth Climber (MTB)

Post by Chalo » May 31 2019 12:28am

Wow! 74 pounds without the battery! And a 250W motor isn't exactly a heavyweight. What's left is like a moped.

I don't say this very often in this forum, but here goes: That thing could use a lot more power.

I think maybe it should be called the Liberty Stealth Descender.
This is to express my gratitude to Justin of Grin Technologies for his extraordinary measures to save this forum for the benefit of all.

User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Re: Liberty Stealth Climber (MTB)

Post by DrkAngel » May 31 2019 9:51am

markz wrote:
May 30 2019 4:53pm

Toss the old rear suspension and throw in a quality air/coil, and a decent suspension fork. A good value one is the Suntour XCR
https://forums.mtbr.com/shocks-suspensi ... 40272.html
Suspension is solid and excellent!
Appears to be a Zoom DH suspension fork.
Zoom Fork.jpg
ZOOM CH-650 DH listed as part in later models.
A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

User avatar
Lenk42602   10 kW

10 kW
Posts: 882
Joined: Oct 04 2007 1:03pm
Location: Pittsburgh

Re: Liberty Stealth Climber (MTB)

Post by Lenk42602 » Jun 01 2019 9:07am

the 75 dollar ebike! kudos for keeping the low buck mantra going. lets see some low buck/low power + high sweat equity ebike action!

cheers,

len

User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Re: Liberty Stealth Climber (MTB)

Post by DrkAngel » Jun 01 2019 11:29am

Lenk42602 wrote:
Jun 01 2019 9:07am
the 75 dollar ebike! kudos for keeping the low buck mantra going. lets see some low buck/low power + high sweat equity ebike action!

cheers,

len
$50! ... ?
Will be adding a $175 1000w hub motor, so might be pushing $405 total including 14s 51.8V 10Ah RC Lipo (4 x 7s 5000mAh)
Should be able to hit 30mph.

Likely, find some Comfort Cruiser for old motor and controller, probably be able to sell that for $500 ...
A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Re: Liberty Stealth Climber (MTB)

Post by DrkAngel » Jun 26 2019 6:01am

Brake pads

Front

Rear
A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

User avatar
skeetab5780   10 MW

10 MW
Posts: 2332
Joined: Jun 15 2009 10:58pm
Location: MA
Contact:

Re: Liberty Stealth Climber (MTB)

Post by skeetab5780 » Jun 26 2019 6:33am

I used to have one of these I picked it up at a used bike store in Florida for $75 in 2009 it was a heavy slow beast with really bad suspension. But man did it look cool

the rear derailur is on a bad angle and cause the smaller toothed cogs to strip/bend and cause your knee to hit the stem (ouch)
I took the pedal assist out and it caused the throttle to start a little when the key was turned, I was able to adjust the throttle gear to solve the issue and it worked good. This was before I knew how easy it was to throw a stronger controller in place.
https://www.youtube.com/watch?v=KhQJksRLRZo&t=351s

User avatar
DrkAngel   100 GW

100 GW
Posts: 5198
Joined: Dec 15 2010 11:14am
Location: Upstate-Western-Southern Tier NY. USA

Re: Liberty Stealth Climber (MTB)

Post by DrkAngel » Jun 26 2019 9:40am

skeetab5780 wrote:
Jun 26 2019 6:33am
I used to have one of these I picked it up at a used bike store in Florida for $75 in 2009 it was a heavy slow beast with really bad suspension. But man did it look cool

the rear derailur is on a bad angle and cause the smaller toothed cogs to strip/bend and cause your knee to hit the stem (ouch)
I took the pedal assist out and it caused the throttle to start a little when the key was turned, I was able to adjust the throttle gear to solve the issue and it worked good. This was before I knew how easy it was to throw a stronger controller in place.
https://www.youtube.com/watch?v=KhQJksRLRZo&t=351s
No battery case, no key, Likely to replace motor - controller with 1500w kit, to bring out full potential.
So, will have new rear gears, and possibly, different crank gears (present one bent).
Has limiting switch for 1500w/750w motor output.
Building large 15s battery and will likely replace seat with motorcycle bench type for slide back - crouch down cruising. Wide enough I can squeeze my legs against, to keep from bouncing off?
A little learning is a dangerous thing;
Drink deep, or taste not the Pierian spring:
There, shallow draughts intoxicate the brain,
And drinking largely, sobers us again.

I enjoy enlightening ... and enlivening the spirit of the innovators.

New & Improved - Acronym Definitions

Index - Homemade Battery Packs - Updated - February 2019

EBike Toolbox - Bargains! $

Endless Sphere Wiki - Lost?

markz   100 GW

100 GW
Posts: 7654
Joined: Jan 09 2014 11:38pm
Location: Alberta Canada

Re: Liberty Stealth Climber (MTB)

Post by markz » Jun 27 2019 10:51pm

DrkAngel has no comprehension of a derailleur.
All ebike power is all that DrkAngel comprehends.
A few fake pedaling motions just for giggles, while in that tuck as seen on TV Lycra.
https://www.youtube.com/watch?v=3Iz7ZMALaCY

Post Reply