750C display fogs up. Can it be taken apart and sealed?

General Discussion about electric bicycles.
Post Reply
EL34   10 mW

10 mW
Posts: 32
Joined: Mar 28 2019 7:42am

750C display fogs up. Can it be taken apart and sealed?

Post by EL34 » Jul 20 2019 10:51am

Does anyone know if you can take apart a 750C display?

Mine and others are getting moisture inside and fogging up.

I would like to seal mine up with some silicone after I have dried it out

But I would like to seal it from the inside rather than a bead of silicone on the outside

I can't see how it comes apart and I don't want to force it apart
I don't see any screws on the back
Does anyone know if the 750C displays can be opened up?

It looks like the seam in my image is how they were assembled?
Attachments
Img_1160.jpg
Img_1160.jpg (65.77 KiB) Viewed 102 times

EL34   10 mW

10 mW
Posts: 32
Joined: Mar 28 2019 7:42am

Re: 750C display fogs up. Can it be taken apart and sealed?

Post by EL34 » Jul 20 2019 1:16pm

I found the info I needed on how to take the 750C apart

I had some bad fogging in my 750C so I took it apart and sealed it better
I have the information here in this post with some images of what I did,

https://electricbike.com/forum/forum/ma ... ith-images
Attachments
Img_1161.jpg
Img_1161.jpg (97.84 KiB) Viewed 95 times
Img_1164.jpg
Img_1164.jpg (37.7 KiB) Viewed 95 times
Img_1166.jpg
Img_1166.jpg (42.62 KiB) Viewed 95 times
Img_1168.jpg
Img_1168.jpg (52.23 KiB) Viewed 95 times

Post Reply