mxus 3005 rc

General Discussion about electric bicycles.
Post Reply
goatman   1 kW

1 kW
Posts: 456
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

mxus 3005 rc

Post by goatman » Nov 17 2019 2:23am

has anyone run this motor in a 20 inch wheel? is it any good?

Glens carzy ebike   10 mW

10 mW
Posts: 23
Joined: Aug 03 2019 3:38pm

Re: mxus 3005 rc

Post by Glens carzy ebike » Nov 26 2019 5:14pm

should be fine this is a 1500 w hub motor in the video but is should be just as good i use 27.5 inch on my e bike and i do 70 km in rush hour traffic !!!!!!! https://www.youtube.com/watch?v=bd2hOaspImY

goatman   1 kW

1 kW
Posts: 456
Joined: Jun 23 2019 6:50pm
Location: Surrey, B.C.

Re: mxus 3005 rc

Post by goatman » Nov 26 2019 8:26pm

should be fine this is a 1500 w hub motor in the video but is should be just as good i use 27.5 inch on my e bike and i do 70 km in rush hour traffic !!!!!!! https://www.youtube.com/watch?v=bd2hOaspImY
[/quote]

ill check out your video, I got it running in a 20 inch wheel at 58.8v and its doing about 53km/h with a phaserunner that I haven't setup the field weakening yet wich should give about 15/20 percent more speed and im going to 16s/67volt wich should be another 10 percent. its a very nice motor with good torque in that small wheel. im hoping to get 65km/h out of it. in case anyones wondering, I got it from Grin for only 225 cad, theyre on sale.
Glens carzy ebike wrote:
Nov 26 2019 5:14pm

Post Reply