MartyMcfly1
10 mW
- Joined
- Jan 16, 2021
- Messages
- 20
I thought I'd consult the experts on here for some advice.
I'm currently running MXUS 3KW Turbo V3 3T on 22s li-po, with Sabvoton 72150 and Grin Cycle Analyst v3. Running on 80a currently @ 92v (approx 7300w)
I'm getting some Tattu li-po, 22s and I'm going to increase the amps to approximately 120a whixh will give me around 11,000w.
I'm changing my cables from 10 awg to 6awg, replacing wiring harness xt90 connectors with EC8 connectors. And replacing the xt90 phase wire connectors. My question is about MXUS stock phase wires which are 4mm. Will they handle 11kw? And which connectors will be best for them. Solderless crimp bullet connectors?
I'm currently running MXUS 3KW Turbo V3 3T on 22s li-po, with Sabvoton 72150 and Grin Cycle Analyst v3. Running on 80a currently @ 92v (approx 7300w)
I'm getting some Tattu li-po, 22s and I'm going to increase the amps to approximately 120a whixh will give me around 11,000w.
I'm changing my cables from 10 awg to 6awg, replacing wiring harness xt90 connectors with EC8 connectors. And replacing the xt90 phase wire connectors. My question is about MXUS stock phase wires which are 4mm. Will they handle 11kw? And which connectors will be best for them. Solderless crimp bullet connectors?